少校
- 注冊時間
- 2013-1-4
- 金幣
- 1831 個
- 威望
- 0 個
- 榮譽
- 0 個
累計簽到：34 天
連續簽到：0 天
[LV.50]初入江湖
|
[ 0.000000] Linux version 3.10.24 (michael@Dot80Server) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38980) ) #4 Fri Dec 27 19:03:38 CST 2013
[ 0.000000] MyLoader: sysp=01000508, boardp=00840082, parts=21080000
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Atheros AR9130 rev 2
[ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:100.000MHz, Ref:5.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 802d49b0, node_mem_map 81000000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: board=TL-WR941ND console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 61464k/65536k available (2183k kernel code, 4072k reserved, 417k data, 276k init, 0k highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.100000] bdinfo: fac txt empty, use default.
[ 0.100000] MIPS: machine is TP-LINK TL-WR941ND
[ 0.340000] bio: create slab <bio-0> at 0
[ 0.340000] Switching to clocksource MIPS
[ 0.350000] NET: Registered protocol family 2
[ 0.350000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.360000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.370000] TCP: Hash tables configured (established 512 bind 512)
[ 0.370000] TCP: reno registered
[ 0.380000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.390000] NET: Registered protocol family 1
[ 0.390000] PCI: CLS 0 bytes, default 32
[ 0.410000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.420000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.430000] msgmni has been set to 120
[ 0.430000] io scheduler noop registered
[ 0.430000] io scheduler deadline registered (default)
[ 0.440000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.470000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[ 0.470000] console [ttyS0] enabled, bootconsole disabled
[ 0.490000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[ 0.500000] m25p80 spi0.0: found mx25l6405d, expected m25p80
[ 0.500000] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[ 0.510000] 5 tp-link partitions found on MTD device spi0.0
[ 0.510000] Creating 5 MTD partitions on "spi0.0":
[ 0.520000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.520000] 0x000000020000-0x000000106400 : "kernel"
[ 0.530000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.540000] 0x000000106400-0x0000007f0000 : "rootfs"
[ 0.550000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.560000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.570000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.570000] 0x0000006e0000-0x0000007f0000 : "rootfs_data"
[ 0.580000] 0x0000007f0000-0x000000800000 : "art"
[ 0.590000] 0x000000020000-0x0000007f0000 : "firmware"
[ 0.610000] libphy: ag71xx_mdio: probed
[ 0.920000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RMII
[ 0.920000] TCP: cubic registered
[ 0.930000] NET: Registered protocol family 17
[ 0.930000] Distributed Switch Architecture driver version 0.1
[ 0.940000] eth0[0]: detected a Marvell 88E6060 switch
[ 0.950000] libphy: dsa slave smi: probed
[ 0.960000] 8021q: 802.1Q VLAN Support v1.8
[ 0.970000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.980000] Freeing unused kernel memory: 276K (802eb000 - 80330000)
[ 4.790000] ar71xx: pll_reg 0xb8050014: 0x13000a44
[ 4.790000] eth0: link up (100Mbps/Full duplex)
[ 6.280000] usbcore: registered new interface driver usbfs
[ 6.290000] usbcore: registered new interface driver hub
[ 6.300000] usbcore: registered new device driver usb
[ 6.340000] SCSI subsystem initialized
[ 6.350000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.360000] ehci-platform: EHCI generic platform driver
[ 6.370000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.380000] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.390000] usbcore: registered new interface driver usb-storage
[ 7.450000] eth0: link down
[ 9.880000] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 9.910000] Linux video capture interface: v2.00
[ 9.930000] u32 classifier
[ 9.940000] input device check on
[ 9.940000] Actions configured
[ 9.950000] Mirror/redirect action on
[ 9.970000] nf_conntrack version 0.5.0 (964 buckets, 3856 max)
[ 9.990000] fuse init (API version 7.22)
[ 9.990000] Loading modules backported from Linux version master-2013-11-05-0-gafa3093
[ 10.000000] Backport generated by backports.git backports-20130802-0-gdb67a3f
[ 10.050000] usbcore: registered new interface driver usblp
[ 10.060000] uvcvideo: Unable to create debugfs directory
[ 10.060000] usbcore: registered new interface driver uvcvideo
[ 10.070000] USB Video Class driver (1.1.1)
[ 10.310000] xt_time: kernel timezone is -0000
[ 10.350000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.440000] PPP generic driver version 2.4.2
[ 10.460000] NET: Registered protocol family 24
[ 10.560000] ath: EEPROM regdomain: 0x0
[ 10.560000] ath: EEPROM indicates default country code should be used
[ 10.560000] ath: doing EEPROM country->regdmn map search
[ 10.560000] ath: country maps to regdmn code: 0x3a
[ 10.560000] ath: Country alpha2 being used: US
[ 10.560000] ath: Regpair used: 0x3a
[ 10.580000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.610000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2122 RF Rev:a2 mem=0xb80c0000, irq=2
[ 10.620000] cfg80211: Calling CRDA to update world regulatory domain
[ 10.640000] cfg80211: World regulatory domain updated:
[ 10.650000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.660000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.670000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.670000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.680000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 10.690000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 10.700000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 10.700000] cfg80211: Calling CRDA for country: US
[ 10.780000] cfg80211: Regulatory domain changed to country: US
[ 10.780000] cfg80211: DFS Master region FCC
[ 10.790000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.790000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 10.800000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 1700 mBm)
[ 10.810000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
[ 10.820000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
[ 10.820000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2400 mBm)
[ 10.830000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 3000 mBm)
[ 10.840000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 19.620000] ar71xx: pll_reg 0xb8050014: 0x13000a44
[ 19.620000] eth0: link up (100Mbps/Full duplex)
[ 19.620000] device lan1 entered promiscuous mode
[ 19.630000] device eth0 entered promiscuous mode
[ 19.650000] device lan2 entered promiscuous mode
[ 19.710000] device lan3 entered promiscuous mode
[ 19.770000] device lan4 entered promiscuous mode
[ 20.040000] dsa dsa.0 lan1: link up, 100 Mb/s, full duplex, flow control disabled
[ 20.040000] br-lan: port 1(lan1) entered forwarding state
[ 20.050000] br-lan: port 1(lan1) entered forwarding state
[ 22.050000] br-lan: port 1(lan1) entered forwarding state
[ 23.020000] device wlan0 entered promiscuous mode
[ 23.020000] br-lan: port 5(wlan0) entered forwarding state
[ 23.030000] br-lan: port 5(wlan0) entered forwarding state
[ 25.030000] br-lan: port 5(wlan0) entered forwarding state
[ 29.480000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 29.520000] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 29.520000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 39.360000] jffs2: notice: (1330) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 492.520000] device wlan0 left promiscuous mode
[ 492.520000] br-lan: port 5(wlan0) entered disabled state
[ 532.170000] eth0: link down
[ 532.190000] br-lan: port 1(lan1) entered disabled state
[ 532.190000] device lan4 left promiscuous mode
[ 532.200000] br-lan: port 4(lan4) entered disabled state
[ 532.210000] device lan3 left promiscuous mode
[ 532.210000] br-lan: port 3(lan3) entered disabled state
[ 532.210000] device lan2 left promiscuous mode
[ 532.220000] br-lan: port 2(lan2) entered disabled state
[ 532.230000] device lan1 left promiscuous mode
[ 532.230000] device eth0 left promiscuous mode
[ 532.230000] br-lan: port 1(lan1) entered disabled state
[ 532.280000] ar71xx: pll_reg 0xb8050014: 0x13000a44
[ 532.280000] eth0: link up (100Mbps/Full duplex)
[ 532.280000] device lan1 entered promiscuous mode
[ 532.290000] device eth0 entered promiscuous mode
[ 532.310000] br-lan: port 1(lan1) entered forwarding state
[ 532.310000] br-lan: port 1(lan1) entered forwarding state
[ 532.340000] device lan2 entered promiscuous mode
[ 532.380000] device lan3 entered promiscuous mode
[ 532.390000] device lan4 entered promiscuous mode
[ 534.310000] br-lan: port 1(lan1) entered forwarding state
[ 535.900000] wlan0: authenticate with 38:83:45:5b:6b:04
[ 535.920000] wlan0: send auth to 38:83:45:5b:6b:04 (try 1/3)
[ 535.930000] wlan0: authenticated
[ 535.950000] wlan0: associate with 38:83:45:5b:6b:04 (try 1/3)
[ 535.960000] wlan0: RX AssocResp from 38:83:45:5b:6b:04 (capab=0x431 status=0 aid=1)
[ 535.970000] wlan0: associated |
|
IP卡
狗仔卡
發表于 2014-1-3 10:04
顯身卡
似懂非懂
